Suny SY-4326 Factory provide Industrial Use Waste Water Treatment Defoamer
Defoamer #SY- 4326, for waste water treatment
Product Description
Defoamer #SY- 4326, with major ingedient of polysiloxane, was developed to resolve the foam problems for waste water treatment during paper production. It can quickly eliminate the foams resulted from sufficient clay, water treatment agents, bactericide, etc., and suppress foams for long time. No harmness to the microbes in waste water, and won't change the COD and BOD performance of waste water.
Product Features:
* quickly eliminate the foams;
* Low consumption, high effeciency;
* Reduce pulp draining due to foams;
Characteristics:
Appearance |
White emulsion |
Density(g/cm3,25ºC) |
1.000±0.100 |
viscosity(mPa·s,25ºC) |
500~3000 |
pH value (25ºC) |
6.0~8.0 |
stability |
Underlayer sediment volume ≤1cm3 (3000rad/min,15min) |
Emulsion type |
Nonionic |
(Remark: above data for ref only, can not be regarded as the techinical standards)
How to use:
Directly, or after proper dilution. this defoamer should be added with the dosing pump or by hand to the aeration tank or water outlet. The actual places and the actual amount should be determined according to the site condition and the tests result.
Precautions:
In case freeze took place during transportation and storage, the defoamer should be unfreezed naturally, and stired evenly before use.
Package and Storage
Use 200kgs, 1000kgs packages, or negotiated packages. Sealed and stock under room temperature, away from light. Avoid the defoamer exposed to extremely cold or hot enviroment. Shelf life is 1 year.
Security
Avoid contact with eyes and respiratory system. Once happen, please wash with lots of clear water, to see a doctor is necessary if the situation is serious.