SUNY SY-610 Defoamers Antifoam for
Powerplant Delsulphurization
Free from Silicon
Item No.: SY-610
Product Description
SUNY SY-610 is kind of non-silicon defoamer compound, specially mading from mineral hydrocarbons, polyether polyol, fatty acid ether ester, synergist, designed to elimate the foam created in the process of wet desulphurization at powerplants,
Key Features & Benifits
-
Self-emulsfying, with less use level comparing to emulsion defoamers
- Easy to clean, and free from the silica gel adsorption caused by those siloxane-based defoamers with emulsion breaking
- With less use level, no harm to the basic properties of foaming system
- Well stable in chemical performances, free from corrosion, toxicity
Physical Properties
| Apperance |
From light yellow to transparent liquid |
| Density(g/cm3, 25ºC) |
0.85-0.95 |
| Viscosity(mPa·s,25ºC) |
200~1500 |
| PH Value(25ºC) |
6.0-8.0 |
| Active Matter Content |
≥90%
|
Tailored Service & Procedures
1. Contact us and indicate the functional area
2. Investigation and select relative information
3. Analyse and locate the challenges
3. Making solution based the data
4. Sample testing
How to Use
1. Add at the inlet of slurry circulating system of the desulphurizion tower, or the underpipe
2. As usual, the dosage is 0.5‰~2‰. However, you may adjust make depends on the situation.
Package and Storage
As usual, pack in plastic drum of 25kg, 200kg,1000kg or by negotiation.
With container well closed, keep under room temperature, avoid exposure to strong sunlight
Use for Safe
In case it is frozen during transit or storage, do not use until it melts itself and blend completely
Audited Supplier 
){kind=link}
){kind=link}